3 of 4 pages
14
172-185
R+B+W
15
186-199
G+B+W
16
200-213
R+G+B+W
17
214-227
Color change
18
228-241
Color dreaming
19
242-255
Auto run
Speed
0-255
(slow
→
quick)
Note:R---red G---green B---blue W---white
11.
Operation by IR remote
:
You can also operate this product by IR remote,
the distance available is at most 10M.
Notice:IR remote is ready to control the unit which is any working mode.
The picture of the IR remote:
Select program Mode
Press PROG button to cycle among static color select mode, color jumping mode,color dreaming
mode and auto run mode.Each press of this button will change to the next mode.
1. When the red color glow and then automatically off indicates that the LED par goes into the static
color select mode.You can press “+” and “-” or button 1-9 to choose static color in this mode.You can
also press FLASH to turn on/off flash and press “+”and “-” to adjust the flash speed.
2. When the green color glow and then automatically off indicates that the LED par goes into color
jumping mode,then press “+” and “-” to adjust color jumping speed.You can also press FLASH to turn
on/off flash and press “+”and “-” to adjust the flash speed.
3. When the blue color glow and then automatically off indicates that the LED par goes into color
dreaming mode,then press “+” and “-” to adjust color dreaming speed.You can also press FLASH to
turn on/off flash and press “+”and “-” to adjust the flash speed.
4. When the white color glow and then automatically off indicates that the LED par goes into auto run
mode.You can press FLASH to turn on/off flash and press “+”and “-” to adjust the flash speed.
M/S mode
Press SL/SA to display SLAV mode. The R/G/B/W lights are off when without master light.