EZGO RXV Cart Install - Visage
EZGO RXV Cart Install - Visage
Tools Required
#3 Phillips tip
#2 Phillips tip
Pliers
9/16 wrench
1/2 wrench
flush cutters
stubby screwdriver handle recommended
Prep the arm as shown.
1. pull the cable through the arm, leaving 8.5" from the white connector tip to the end of the pipe.
2. secure the cable to the mounting tab using 2 zip ites, with the zip tie heads on the side as showm.
3. install the switch in the back cover, with the wire leads pointing toward the semicircular cutout.
4. tighten the switch hex nut 1/4 turn using the 9/16 wrench, then tighten the back up nut with pliers.
EZGO RXV Cart Install - Visage - 1
