13
Callous remover
General Information About Callous Remover Use:
The callous remover head is intended to smooth rough, calloused skin on the feet. The unique
rollers are designed to gently and effectively buff away tough skin on the soles and feet. The
callous remover attachment is safer than metal scrapers that can damage and cut the skin.
For hygienic reasons, the callous remover head is only intended for use by one person
and should not be shared with others. The callous remover head is only intended for use
on heels and feet. Do not use this attachment head on any other areas of the body.
If you have sensitive skin or other skin conditions, please consult a physician prior to
use. Do not use on open wounds or sores, skin that is red, irritated, inflamed, infected,
blistered or has warts.
1. Wash and clean the skin and dry fully. Only use on dry skin. Do not use on bleeding or
broken skin.
2. Turn unit on to your desired speed, and gently pass over calloused skin back and forth for
2-3 seconds. Do not press hard. Stop and check if you have received the softness you
desire. If not, go over the area for another 2-3 seconds and then check again. Continue this
method until the level of smoothness is obtained. Warning: Stop using if the skin becomes
sore or inflamed. Seek medical attention if the skin becomes severely irritated or
bleeds.
3. Turn off the unit.
4. Rinse the skin or use a wet towel to wipe away excess dead skin debris.
5. To clean the callous remover head, remove it from the unit and rinse with clean water.
Callous remover
