ViSAGE 18163902, Руководство пользователя

Страница: 22 / 33

Choosing the correct attachment
22
You can choose from 4 different cutting lengths with the comb
attachment for the beard trimmer attachment. The numbers
3, 4, 5, 6 correspond to the cut lengths in mm with the fine
setting level 1 (sliding switch for fine adjustment
4
at the
very bottom). With the fine setting level 3 (sliding switch for
fine adjustment at the very top), the configured cut length is
reduced by approx. 0.5 mm depending on the trimming angle.
1. Comb the beard in the direction of growth.
2. Cut the beard downwards from the ear to the chin. First
trim one and then the other side.
3. Use the beard trimmer attachment without the comb
attachment to trim the beard very short or the moustache
and contours. The cutting edge of the beard trimmer
attachment is pointed towards the beard at a right angle.
4. Push the comb attachment so that the desired cut length
locks into place under the arrow mark.
5. Place the comb attachment with the rounded side up
against the bear and, from below, cut upwards against the
direction of beard growth.
6. To cut your moustache, first comb it straight down. Then
use either the beard trimmer attachment or the contour
trimmer attachment
15
. Start in the middle above your
mouth and trim one side and then the other.
Contour trimmer attachment
1. Use the contour trimmer attachment
15
to shorten and
shape your moustache, whiskers, sideburns or eye brows.
2. Position the edge of the attachment at the desired height
of the hair line and move the hair trimmer down.