ViSAGE 17113904, Руководство пользователя

Страница: 18 / 31

Handling
18
perpendicular to the direction of hair growth.
5. After a few strokes, use your free hand to check the results
and repeat step 4 if necessary.
6. Shave as described in steps 3–4.
7. If necessary, use the trimmer as described in the chapter
“Using the trimmer”.
8. Switch the shaver off once you have finished shaving.
9. Clean the shaver as described in the chapter “Daily cleaning
after a wet shave”.
Using the trimmer
Keep in mind that the trimmer always generates a
straight cutting edge. If you do not want a straight
cutting edge, you must hold the shaver at an
angle.
For hard-to-reach areas or for very precise cuts,
use a comb to check the hair you intend to trim
with the trimmer and the cut length.
Use the trimmer as follows:
1. Move the trimmer
13
all the way out until it audibly locks
into place (see
Fig. C
).
2. Use the On/Off switch
5
to turn the shaver on.
3. Slowly guide the trimmer up to the hair you intend to cut.
Always use short strokes to cut your hair.
4. Turn the shaver off.
5. Clean the shaver as described in the chapter “Daily cleaning
after a wet shave” or “Daily cleaning after a dry shave”.