VirusKiller Functions
Automatic Operation Mode
When the unit is switched on, either by the power switch on the main control board or the
on/off button on the remote control, the product is in automatic mode. Blue LED lights are
displayed and the fan is set to quiet mode (FAN 1). If small amounts of dust or VOC’s are
detected by the sensor, the LED color changes to yellow. If high levels of dust or VOC’s are
detected, the LED changes to red and the fan speed switches to full power (FAN 3). When
the dust or VOC levels return to healthy levels, the unit automatically returns to quiet mode
and displays the blue LED.
·
Blue LED – Air quality is GOOD
·
Yellow LED – Air quality is NORMAL
·
Red LED – Air quality is POOR
Note
– When the unit is switched on the Indoor Air Quality sensor (IAQ) takes 2 minutes
to calibrate.
When power button is pressed, the product emits a beep sound and begins to operate. If
the product does not operate, ensure the socket is plugged securely into a live, properly
grounded outlet of the correct voltage.
Manual Operation Mode
If you wish to stop automatic mode and manually operate the unit, press any button on
the main board or on the remote control. You may then operate the unit as shown below.
·
Increasing the Fan Speed
Press up button on main board ① or
Press
▲
button of remote controller ②
Fan speed will increase when the UP button is pressed and the unit will beep.
FAN 1
Quiet Mode
FAN 2
Normal Mode
FAN 3
High Speed Mode
8 9
