VirtuFit Water Resistance Row 800 Rowing Machine
9
EN
STEP 3
12
82
81
86
82
81
86
1
43R
43L
2
R ack
L
R
• There is an “L” decal on the left Pedal Cap(43L), and an “R” decal on the right Pedal Cap (43R);
• Insert the Pedal Shaft (12) through the tube located on the Front Support (2);
• Slide the right Pedal Cap (43R) onto the right side on the Pedal Shaft (12) and make it ride on the
Rack on the Front Support (2);
• Slide the left Pedal Cap (43L) onto the left side on the Pedal Shaft (12) and make it ride on the
Rack on the Front Support(2);
• Then secure the Pedal Caps (43R, 43L) with Washers(M10)(82), Lock Washer (M10)(81), and Acorn
Nuts (M10 X 1.5)(86) at both ends of the Pedal Shaft (12);
• You need to use two combination Wrenches to tighten the Acorn Nuts (M10 X 1.5)(86) at both
ends of the Pedal Shaft(12) at the same time.
ASSEMBLY INSTRUCTIONS
