VIRTUFIT TR-75 Скачать руководство пользователя страница 10

ENG

VirtuFit  TR-75 Treadmill

10

MAINTENANCE TREADMILL

RUNNING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction 
may play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We
recommend a periodic inspection of the deck. You need contact with our service center if you find the
damage of the deck.
We recommend lubrication of the deck according to the following timetable:

I.  Light user (less than 3 hours/ week) annually
II.  Medium user (3-5 hours/ week) every six months
III.  Heavy user (more than 5 hours/ week) every three months

Best indicator is to lubricale when the walking platform feels dry. We recommend that you buy the
lubrication from our distributor or directly to our company.

Attention: Any repair need the professional technician.

I.  We suggest that you should cut off the power 
for 10 minutes after keep running 2HS ,so that it’s 
good for maintain the treadmill. 

II.  For avoiding the slipping during running , the 
belt not too loose; for avoiding the more abrasion 
between the roller and belt and maintain the 
machine’s good running ,the belt not too tight. 
You can adjust the distance between plates and 
belt, the belt be away from the plates about 50-
75mm on both sides, if the best not too tight and 
loose.

We strongly recommend that you do the following:
1.  Switch off and remove the power cable from the wall after every use, especially if children are present.
2.  Clean your treadmill after use.
3.  Use a dry cloth to clean the control panel and areas around the power switch. Use a soft clean cloth  
 

and cleanser to remove stubborn stains and dirt off the running belt.

4.  Tighten the running belt once a month.
5.  Keep your treadmill in a safe dry place away from heat and water.

LUBRICATING THE BELT

Содержание TR-75



















Отзывы: