8
VirtuFit RB 1.0 Recumbent Bike
ENG
MAINTENANCE RECUMBENT BIKE
Regular maintenance is important for optimal operation and to reduce wear. During use, regularly check
all parts of the exercise bike and tighten them securely. Replace worn parts immediately by contacting the
manufacturer. Use a damp cloth and a little soft soap to clean the recumbent bike.
IMPORTANT: keep liquids away from the control panel to prevent damage. Keep the control panel away
from direct sunlight.
Squeaky recumbent bike
First lubricate all rotating parts with silicone spray. It can also be that a screw is tightened too tightly or too
loosely, this creates friction and therefore a beep. If this is the case, try to find out exactly where the beep is
coming from and then loosen or tighten this screw. The screws should be tightened in such a way that they
can always be released by hand.
Ticking noise when pedaling
This is probably caused by one of the pedals. Disassemble the trapper (s) and then reattach them to the de-
vice. Be careful, the left-hand trapper has to be turned counterclockwise to tighten, the right-hand trapper
clockwise. Tighten the pedals securely. If this does not offer the solution, report this to the supplier.
Heart rate display does not work
This can have various causes.
I. The sensor cables running from the heart rate sensor to the display are incorrectly fitted or have come
off during use.
II. It may be that the sensors have become damp, dirty or greasy, clean them regularly.
The console doesn’t work
If the console isn’t working the batteries may be empty. Replace the batteries.
Are there any other problems? Please contact your dealer.
PROBLEM SOLUTIONS
