VIRTUFIT Low Entry Bike 1.0 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 22

VIRTUFIT Low Entry Bike 1.0 Скачать руководство пользователя страница 5

EN

VirtuFit Low Entry Bike 1.0 Hometrainer

5

STEP 1

Missing parts:

If you think you are missing certain parts in your package, carefully check the styrofoa and

the hometrainer. Some parts (bolts, screws, etc.) are already attached to / in the hometrainer.

Error message:

Ensure that all cables are carefully attached. The aluminum legs are very sensitive and

must remain straight. Do you receive an error message after mounting your hometrainer? Then you have

to straighten these aluminum legs again, this may cause the error message to disappear.

Socket screws:

The hometrainer contains socket screws, make sure that the allen key is firmly in the

bolt before you apply force to the key. In this way you prevent the head of the socket head screw from

being rotated.

•

Attach the front stabilizer (2) to the main frame (1) with the Inner hexagon bolt (17) and Arc washers

(16).

•

Fix the rear stabilizer (3) to the main frame (1) with the Carriage bolt (13), Arc washers (14) and Acorn

nut (15) as shown.

ASSEMBLY INSTRUCTIONS

Page 4

«
...
3
4
5
6
7
...
»

Содержание Low Entry Bike 1.0























Отзывы:

Нет отзывов