VirtuFit iConsole Total Fit Ergometer Crosstrainer
5
EN
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the hometrainer. Some parts (bolts, screws, etc.) are already attached to / in the hometrainer.
Error message: Ensure that all cables are carefully attached. The aluminum legs are very sensitive and
must remain straight. Do you receive an error message after mounting your hometrainer? Then you have
to straighten these aluminum legs again, this may cause the error message to disappear.
Socket screws: The hometrainer contains socket screws, make sure that the allen key is firmly in the
bolt before you apply force to the key. In this way you prevent the head of the socket head screw from
being rotated.
Transport wheels: Make sure that the transport wheels are attached to the front of the device.
STEP 1
• Install the Front bottom tube (2) and Rear bottom tube (3) to the Main frame (1) with the Hex socket
screws (17), Spring washers (18) and Arc washers (16) as shown.
ASSEMBLY INSTRUCTIONS
