TITEL HOOFDSTUK
EN
VirtuFit iConsole HTR 2.1 Hometrainer
22
CONTROL PANEL
WATT MODE
1. You can adjust the WATT values by turning and then pressing the knob. Through again, you can also
set the time.
2. Press START to start exercising. The WATT can be adjusted during training. You can enter a maximum
value. If you go over this, the device will beep.
USER PROGRAM MODE
In this mode you can compile your own program.
1. Druk en draai op de ronde knop om de U te selecteren. Press and turn the round knob to select the ‘U’.
2. Press and turn the knob to change the resistance per bar.
3. Press START to begin. Press START again to set the time if necessary turn the knob. Press START again
to resume. The resistance will change automatically as you have set it.
BODY FAT MODE
1. Press the Body Fat button. Then you can choose from U1-U4 to select your user program which you
can change when starting up or resetting the device.
2. After selecting, you can place your hands on the heart rate sensors on the handlebars.
3. After a few seconds, an approximation of your BMI (B) and your body fat percentage (F) will appear.
