1. Open
X-plane
and go to Configuration\Joystick tab.
2. Select YOKO and calibrate the axes if required.
3. Assign the according action to each axis. Roll and Pitch.
4. Assign the action to each button according your needs
X-Plane
1. Open
X-Plane
, go to Configuration/Joystick tab, select YOKO from the devices list.
Assign all axes or buttons to "none" if configured.
2. Open
VFTest&Calibrate-X
software, go to YOKO Captain tab and select the
device from the devices list at right side.
3. Now, you can test all the YOKO buttons and axes on the tab. Also you can
change the sensitivity though the "actuation curves" and save changes.
4. VFTest&Calibrate-X has to be running when using YOKO because this software
reads the data from the device and send it to X-Plane so
each time you start
X-Plane, you have to run VFTest&Calibrate-X as well
. You can use Windows
Scheduler to start VFTest&Calibrate-X automatically.
YOKO
Configuration
options on
X-Plane
YOKO | User's manual
5
Through
VFTest&Calibrate-X
on
X-Plane. You have to use VF-
Test&Calibrate-X Soft, downloadable
from our web-site:
www.virtual-fly.com/en/downloads
Through
X-Plane
Configuration\Joystick tab.