Virtual Research V6, Руководство пользователя

Страница: 9 / 23

Pin Out Information:
VGA input connector format
15 pin high density HD female connector
Pin Signal
1 Red
2 Green
3 Blue
4 Ground
5 n/c
6 Ground
7 Ground
8 Ground
9 n/c
10 Ground
11 Ground
12 n/c
13 Horizontal sync
14 Vertical sync
15 n/c
Connecting the V6
** REMINDER: Refer to the Interfacing Manual (Section 3) to see which cables are required to
successfully interface the V6 HMD to your system. **
Step One Mono/Left Eye Input
Connect one cable from the “Left Eye” input (mono) into the graphics channel of your
system.
Step Two Stereo/Right Eye Input
Connect a second cable from the “Right Eye/Stereo” Input to the second graphics
channel of your computer. You must have two graphics channels to run your V6 in
stereo. ** Reminder all V6 control box inputs are female, so you must use male
connections from the control box to whatever connection your computer accepts.
Refer to the Interfacing Manual in Section 3. **
Step Three External Monitor Option
Connect your external VGA monitor to the V6 Control box “Monitor Out” connection.
Step Four Connecting V6 to control box
Secure the HMD’s 50 Pin SCSI connector to the Control box.