background image

VIRTUAL REALITY SOUND LABS

®

 products are designed and manufactured to provide a high level of 

trouble-free performance. VIRTUAL REALITY SOUND LABS

®

 warrants, to the original purchaser, that 

its products are free from defects in material and workmanship for 30 days from the date of original 
purchase. As part of our commitment to product excellence, VIRTUAL REALITY SOUND LABS

®

 and/or 

its af

fi

 liates routinely improve the designs, materials or production methods of its existing products. 

Because it is impractical to publicize all changes in every product, we reserve the right to make such 
changes without notice.

CONDITIONS OF WARRANTY:
If during the 30 day warranty period your new product is found to be defective,  VIRTUAL REALITY 
SOUND LABS

®

 will repair such defect, or replace the product, without charge for parts or labor subject 

to the following conditions:
1. All repairs must be performed by VIRTUAL REALITY SOUND LABS

®

 and/or its af

fi

 liates in Eatontown, 

New Jersey.
2. The equipment must not have been altered or been damaged through negligence, accident, or im-
proper operation.
3. The replacement of parts are exempted from this warranty when replacement is necessary due to 
normal wear and tear.
4. All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.
5. Repair or replacement parts supplied by VIRTUAL REALITY SOUND LABS

®

 under this warranty are 

protected only for the unexpired portion of the original warranty.
6. In the case of car stereos, this warranty does not extend to the elimination of car static or motor noise; 
correction of antenna problems; costs incurred for the removal or reinstallation of the product; damage 
to tapes, speakers, accessories or car electrical systems.
7. VIRTUAL REALITY SOUND LABS

®

 will not be responsible for any charge incurred for installation.

OWNER’S RESPONSIBILITIES:
VIRTUAL REALITY SOUND LABS

®

 will make every effort to provide warranty service within a reasonable 

period of time. 
SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED, OR IF YOU WOULD LIKE ASSIS-
TANCE IN OBTAINING SERVICE, PLEASE CALL TOLL FREE 1-800-445-1797, 8:30am - 4:30pm EST.
In order to provide you with the proper warranty service, we request that you adhere to the following 
procedure:
1. Include a copy of your sales receipt or bill of sale with your unit when it is returned for warranty 
service.
2. If it is necessary to return your product for service, please return it securely packed, preferably in the 
original shipping carton, and freight and insurance prepaid to the following address: VIRTUAL REALITY 
SOUND LABS, Service Department, 41 James Way, Eatontown,  New Jersey 07724.
3. Please include a detailed explanation of the problem you are having.
4. If your product is found by VIRTUAL REALITY SOUND LABS

®

 to have a defect in material or work-

manship, within the warranty period, it will be repaired or replaced at no charge and returned to you 
prepaid.  Where permitted by Iaw VIRTUAL REALITY SOUND LABS

®

 liability shall be limited to that set 

forth in this warranty. This warranty shall be the exclusive remedy of the purchaser.

VIRTUAL REALITY SOUND LABS

®

 makes no other warranty of any kind, expressed or implied; and all 

implied warranties, are hereby disclaimed by VIRTUAL REALITY SOUND LABS

®

 and excluded from this 

warranty, VIRTUAL REALITY SOUND LABS

®

 and/or its af

fi

 liates, the manufacturer, distributor and seller 

shall not be liable for any injury, loss or damage, incidental or consequential, arising out of the use or 
intended use of the product.

Limited Warranty

Содержание Elite VR500CS-BT

























Отзывы: