2: Introduction to VLAN
Configuring VLAN and CDP on a GW Series Router
Issue 1.4
Page 8 of 12
© 2012 Virtual Access.
Figure 5: An example of a deployment scenario
Command Line
Set Ethernet interface vlan tag = eth-0,0
Set Ethernet interface vlan tag =eth-1,100
Set Ethernet VLAN tags enabled = yes
Table 4: Command lines used for the deployment scenario
2.5
Debugging VLAN
To view the Ethernet switch information, in the Expert View menu, click
operations ->
performance -> interface stats -> ethernet switch
. The Statistics for Ethernet
Switch page appears.
