
7
8
9
10
Little Tikes Consumer Service || 2180 Barlow Road Hudson, Ohio 44236 U.S.A. || 1-800-321-0183
1118-0-E
11
12
Push up firmly on the throttle to remove the handlebar grip
and slide the throttle off of the handlebar.
Take the new handlebar and slide on the throttle. Then, slide
the new grip all the way onto the handlebar.
Place the handlebar back onto the scooter. Align the front
screw with the opening on the scooter and tighten it with
the small Allen wrench. Then, tighten the remaining two
screws with the large Allen wrench.
Use zip ties to secure the cables to the handlebar. If
necessary, trim the tail of the zip ties once secured.
Replace the throttle screw, and tighten it with an Allen
wrench. The button on the throttle should face the deck.
Do not fully tighten to leave room for adjustment.
Replace the brake screw, and tighten it with an Allen wrench.
The brake should face outward, away from the deck.
Do not fully tighten to leave room for adjustment.
Little Tikes
Illustrations are for reference only. Styles may vary from actual contents.
On the opposite side of the handle, slide on the brake. Then,
slide the new grip all the way onto the handlebar.
13
14
Adjust the brake and throttle by twisting to the desired
position. Then, tighten firmly with an Allen wrench.