Viro RAM-TOUCH, Руководство пользователя

Страница: 52 / 94

User manual Page
50
of
88
Storing/erasing fingerprints in the system
With the door open, access the system by pressing any key.
Press OK to access the storing/erasing fingerprints function.
Use the arrow buttons and to scroll through the various memory positions
and check if they are free (in addition to what is shown on the display, the green
LEDs light up) or occupied (in addition to what is shown on the display, the red
LEDs light up).
If the position is free, press OK; the display will show:
Press OK again; the display will show:
When the green LEDs flash in sequence from top to bottom, the safe/cabinet can
be opened by means of a fingerprint. The speed at which the green LEDs flash is
the correct speed at which to swipe your finger in the guide channel from top to
bottom, applying slight pressure as if pressing down on adhesive tape. The display
shows any reason for incorrect finger swiping. Swipe your finger once and, after a
brief pause, swipe the same finger again to confirm.
The display shows any reason for incorrect finger swiping. If performed correctly,
3 beeps will be emitted and the display will show:
If the position is occupied, the display will show:
Press OK again to erase the stored fingerprint; 3 beeps will be emitted to confirm
cancellation and the display will show:
Note: after 10 seconds, if no button has been pressed the system will
emit a beep and switch off automatically.