Virnig VAB, Руководство пользователя

Страница: 4 / 20

broom head should provide adequate down pressure for sweeping.
Sweeping Recommendations (cont.)

When sweeping snow, increase brush speed and decrease travel speed.
This allows the snow to be removed effectively. In heavy or deep snow,
use multiple passes to clear the snow.

Use of the optional deflector will limit distance swept material is thrown.
Manual Angle Operation

Manual angle operation is achieved with a hitch pin located on the
centering swing linkage. Angles that are available are straight, 27° right
or 27° left.

To change the angle of the brush head, lift broom head off of the ground,
remove the pin, swing the head in the desired direction and reinstall pin.
Make sure broom is not rotating and machine is shut off when changing
the angle manually.
Optional Hydraulic Angle with Electric Control Operation

If the machine has the electrical package (7 pin, 8 pin or 14 pin connector
for skid loaders), connect the electrical plug to the plug on the boom arm
of the loader when hooking up the attachment to the loader. The angle
of the broom should now be controlled by primary electrical switch
located in the operator station of the machine.

If the machine does not have an electrical package, there are 2 options
to make the Hydraulic Angle with Electric Controls work. If the machine
has a 12 volt accessory plug (cigarette lighter), you can use the optional
control box for power. If the machine does not have a 12 volt accessory
plug, a 12 volt accessory outlet is available from Virnig Manufacturing to
connect to the battery of the machine and then utilizes the optional
control box.

In either of the above scenarios, the broom needs to be running in the
sweeping direction before the electro-hydraulic angle will function. The
hydraulic angle will not work if the broom is running in reverse.