1
WARNING To reduce the risk of injury, user must read instruction manual
1. General Power Tool Safety Warnings
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electrical shock, fire, and/or serious injury.
Save all instructions for future reference.
1) Work area safety
a. Keep work area clean and well lit.
b. Do not operate power tools in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders at a safe distance while operating a power tool.
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges, and refrigerators.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the
power tool. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged
or entangled cords are dangerous and increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor
use.
f. Always use the Ground Fault Current Interrupter (GFCI) protected supply to protect
against electrical shock.
3) Personal safety
a. Stay alert, watch what you are doing, and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol, or medication. A moment of inattention while operating power tools
may result in serious personal injury.
10
CE Declaration of Conformity
We:
Declare that the product detailed below:
Diamond core drill
Model: VA – CD3
Satisfies the requirement of the Council Directives:
Machinery Directive 2006/42/EC
Low Voltage Directive 2006/95/EC
Electromagnetic Compatibility Directive 2004/108/EC
And complies with these standards:
EN60745-1/A11: 2010
EN60745-2-1: 2010
EN55014-1/A1: 2009
EN55014-2/A2: 2008
EN61000-3-2/A2: 2009
EN61000-3-11: 2000
