Virax 162120 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 60

background image

5

Safety instructions

The Virax 162120 threading machine is an electro-mechanical machine which presents certain

hazards. It is therefore important to obey the following instructions to avoid causing yourself or

others possible serious injuries or lesions.

General safety instructions

Choice of tool

Use a suitable tool. Do not use low-power adaptable tools or devices for carrying out heavy work.

Do not use tools for purposes other than those for which they have been designed.

Maintenance and storage

Store your tools in a safe place. Unused tools must be stored in a dry, closed location out of the

reach of children.
Maintain your tools carefully. Maintain your own tools so that you can work better and in greater

safety. Observe maintenance indications as well as those relating to the changing of accessories.

Keep handles dry and free of oil and grease.
Check whether the tool is damaged. Before using the tool, always carefully check that all the

parts are operating correctly. Check that the parts move correctly, that they do not seize and that

other parts are not damaged. All the components must be installed correctly and fulfil the

conditions needed to ensure that the tool is in perfect working order. All safety devices, switches

or other damaged or defective parts must be appropriately repaired or replaced by a qualified

technician.

Warning!

Be sure to use the tool and its accessories in accordance with the safety instructions.

Consider the range of options for the tool taking into account the working conditions and the task

to be carried out. It can be dangerous to use the tool for tasks for which it is not intended.
This tool complies with current safety regulations. All repairs must be carried out by qualified

professionals using original spare parts, failing which the tool may become dangerous to use

and the warranty will be nullified.

Safety instructions for the user

Keep children away. Do not allow other people to touch the tool; keep them away from your

working area.
Wear appropriate working clothes. Do not wear loose clothing or jewellery; they could be caught

in the moving parts.
When working in the open air, you are recommended to wear rubber gloves and shoes with

nonslip soles. If you have long hair, tie it back with a hair net.
Do not increase your range. Avoid adopting a posture which you find tiring; make sure you have

a firm footing and always maintain your balance.
Always concentrate. Look at your work, use your common sense and do not use the tool when

you are tired.

–

–

–

–

–

–

–

–

–

–

–

EN

«
...
5
6
7
8
9
...
»

Содержание 162120





























































Отзывы:

Нет отзывов

Похожие инструкции для 162120

Бренд: Waterwise Страницы: 12

Бренд: ParaBody Страницы: 38

Бренд: GE Страницы: 242

Бренд: GE Страницы: 24

Бренд: Balanced Body Страницы: 3

Бренд: Obdstar Страницы: 10

Sonopuls HD 4050

Бренд: BANDELIN Страницы: 48

Бренд: Hammer Strength Страницы: 18

Бренд: MagCore Страницы: 80

Бренд: MagCore Страницы: 80

Бренд: Velp Scientifica Страницы: 16

Бренд: Velp Scientifica Страницы: 2

Бренд: Velp Scientifica Страницы: 32

Бренд: Velleman-Kit Страницы: 32

Бренд: +GF+ Страницы: 2

Unity for Pro-Flex Pivot

Бренд: Össur Страницы: 40

ICELOCK 234 LANYARD

Бренд: Össur Страницы: 94

Бренд: Össur Страницы: 115

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды