USBdock Installation Manual
3
2-1 Installation
The following sections will guide you through the setup of the USBdock for operation.
•
For Windows
®
98:
Please refer to the software installation manual to install
the Windows
®
98 driver.
•
For use with the Mobile Rack:
please refer to the Mobile Rack Installation
manual for instructions for installing devices in the Mobile Rack drive case.
2-1.1 Install Driver Software (For Windows 98 only)
No driver is needed if you are running Windows 2000 or Mac OS. However,
before
connecting the USBdock to your system, Windows 98 users must install the driver
provided on the software driver diskette. Please refer to the Software
Installation Manual for instructions.
2-1.2 Install Stand Set on Mobile Rack
A 4-piece stand set is included to help heat dissipation and provide secure placement
of the Mobile Rack. After mounting the device in the Mobile Rack, slide a stand pad
onto each corner .
USBdock Docking Kit Components
USB Cable
Power Adapter
Power Cord
+5V/+12V
Power Adapter
USBdock
Mobile Rack
Stand Set
Mobile Rack Stand Set Installed
Stand Pad
(With Raised Nub
on Bottom)
(x4)
Mobile Rack
Docking Case
Mobile Rack
Drive Case