Owner’s manual
10
EN
1. 3 x LED strips (50 cm)
2. 1x LED strip (50 cm) including USB cable (50 cm)
3. 6x connection pieces plus 1x replacement connection piece
4. 3x connector cables (30 cm)
5.
1x remote control including 3 V type CR2025 button cell (inserted)
Remote control
1. On/Off switch
2. White light (mixed color)
3.
Flash (flashing function)
4. Strobe (slow fading out of a color)
5. Fade (slow fading out with color change)
6. Smooth (smooth color change)
7. Control panel for color selection (12 mixed colors)
8. RGB setting (red, green, blue)
9.
Increase/decrease the intensity of color
Start-up
ATTENTION!
•
Make sure to connect the LED strips and the connector cables
with one another first before you plug the product into a device
that is connected with the mains supply.
1. Connecting the cables – Connect the LED strips with each
other. To do so, connect the LED strips, connection pieces
1
2
3
4
5
6
9
8
7
