VIPOW BAT1139, Руководство пользователя, Страница: 12 / 28

Instrukcja obsługi
12
EN
6. ln order to avoid the battery being drained out, Please
disconnect Charger and Battery in time if charger not be
connected with AC power source.
7. Green light constantly ON if charger only connected to battery;
Green light constantly ON If charger only connected to AC
power source;
Green & Red light ON simultaneously if Charger connected
to AC power source & Battery but reverse polarity. Red light
constantly ON If Reverse Polarity.
8. For the charger built in cooling fan: the fan only activated while
charging, but inactive if charging stopped, floating charging and
fully charged.
• The charger is designed for charging 6 / 12V lead-acid batteries.
Do not use the charger for any other purpose.
• Check the charger cables prior to use. Ensure that no cracks
have occurred in the cables or in the bend protection. A charger
with damaged cables must not be used. A damage cable must
be replaced by a related professional.
• Never charge a damaged battery.
• Never charge a frozen battery.
• Never place the charger on top of the battery when charging.
• Always provide for proper ventilation during charging.
• Avoid covering the charger.
• A battery being charged could emit explosive gasses. Prevent
sparks close to the battery. When batteries are reaching the end
of their Ilfe cycle Internal sparks may occur.
• All batteries fall sooner or later. A battery that falls during
charging Is normally taken care of by the chargers advanced
control, but some rare errors in the battery could still exist. Don’t
leave any battery during charging unattended for a longer period
of time.
• Ensure that the cabling does not jam or comes into contact with
hot surfaces or sharp edges.
• Battery acid is corrosive. Rinse immediately with water if acid
comes into contact with skin or
Safety Matters