SLIDER EXTRACTOR SETUP
!!! Read operators manual thoroughly
prior to operating or servicing this
machine!!!
Carefully check the shipping carton for
signs of damage. Report any carton
damage to carrier immediately.
Check carton contents to ensure carton is
complete. Contact your Viper distributor if
anything is missing.
Contents:
•
Carpet Extractor
•
Short “bleeder” vacuum hose
•
50’ extension power cable
•
Vacuum and solution hoses
!!! Read operators manual
thoroughly prior to operating or
servicing this machine!!!
1)
Using a hose or bucket, fill tank with a
maximum of 10 gallons of hot water.
2)
Add distributor recommended cleaning
solution
!!! Do not use flammable liquids or
operate machine in or near
flammable liquids or vapors!!!
3)
Connect the supplied extension power
cable to the machine. Plug cord into a
grounded wall outlet. (see grounding
instructions)
4)
Attach vacuum and solution hoses to
appropriate connections on the
machine and your wand.. As you do
this, always inspect hoses for cracks or
fraying. Do not use if hose are cracked
of frayed.
MACHINE OPERATION
PRIOR TO EXTRACTING CARPETS
1)
Inspect power cable and extension
cable for damage. Replace cable if
damage is found.
2)
Vacuum carpet to remove debris prior
to extracting carpet.
CARPET EXTRACTING
1)
Turn on vacuum / pump switch.
2)
To release spray, simply pull back on
your wand trigger.
OPERATING HINTS
1)
Work away from power outlet and
power cable in order to avoid damage
to the power cable.
2)
Continually check for foam buildup in
recovery tank. Use a distributor
recommended foam control solution.
NOTE: Excessive foam buildup will not
activate the float shut-off and may cause
damage to the vacuum motor.
3)
Repeat extraction path on heavily
soiled areas.
4)
When recover of the dirty solution ends,
or the solution tank is empty, you must
drain the recovery tank. (see TANK
DRAINING)
USE OF ACCESSORY TOOLS
NOTE: Prior to cleaning upholstery, be
sure to read cleaning instructions provided
by the manufacturer.
1)
Attach vacuum and solution hoses to
appropriate connections on the
machine.
2)
Connect (optional) accessory tool to
solution and vacuum hoses.
5