background image

17

©   2 0 0 6   d i r e c t e d   e l e c t r o n i c s

p

prro

og

grra

am

mm

miin

ng

g  2

2--w

wa

ayy  rre

em

mo

otte

e

To enter programming mode

Press and hold all four remote control buttons simultaneously

until one long beep is heard. Programming mode is now entered.

Beeps On/Off

Press 

to select beeps On/Off. One beep is notification beeps

On, Two beeps is notification beeps Off. The notification beeps

are programmed On from the factory and can be programmed

Off if they are not desired. When programmed Off the remote

will only flash the LEDs as notification of a command page or

an alarm page.

2-Way LED Remote battery low notification

Press 

to select low battery notification On/Off. One beep is

low battery notification On. Two beeps is low battery notifica-

tion Off. The Low battery Beeps are programmed On from the

factory and can be programmed Off if they are not desired.

When programmed Off the remote will not give any notification

that the battery charge level in the remote is low.

Page notification

The remote control can be programmed to notify the user of a

page (audibly beeping if the vehicle’s status changes, e.g. door

unlocked, engine started, vehicle violation, etc.). On the 2-way

LED remote press 

to select page On/Off. One beep is page

On, Two beeps is page Off. When programmed off the remote will

not give any notification that a page was received from the vehicle.

Содержание Model 3002






















































Отзывы: