MA11818
Honda Pioneer 1000 Winch Mount
23001 Industrial Blvd
Rogers, MN 55374
866.527.7637
866.527.7637
6
10) Reattach the winch cable to the winch. Make sure that it is running over the top of
the spool and between the tie rods as shown in Figure 6.
Figure 6
11) Reinstall the front bumper.
12) Mount the contactor under the hood of the machine and wire up according to the
winch manual. It may be necessary to swap the longer blue and yellow wires with
the shorter black and red wires on some winches.
13) Once the winch is wired up properly, tie the end of the cable off to a secure location
(such as a tree, a post, or a full sized truck), set the brake on the machine and wind
the winch in carefully (following the duty cycle noted in your winch operations
manual)
, watching to make sure the cable doesn’t become tangled. This will help
set the cable and prevent future tangles.
