Install the squeegee and attach it by
using the two knobs.
Adjust squeegee angle and blade
pressure for optimal water pick-up
by turning the adjustment knob on
the support.
Loosen the two knobs to remove
the side skirt.
Turn the main key to on and press the click on button to install the brush
automatically. Deck will lower and brushes turn slowly to attach.
To install the brush/pad holder, pull up the metal handle and slide in the brush/pad
holder until it stops against the pins in the proper position and release the handle.
Reinstall the side skirt.
Use and maintenance
Operating guidelines AS1050R
December 2020
Disconnect battery charger and store
the cable.
Fill the solution tank with fresh
water and add low foam detergent
according to needs.
The water temperature must not
exceed 104° F (40° C).
Solution level indicator is on the side of the tank showing current level. If the
solution tank is empty or recovery tank full, an indicator on the display will show
up with sound warning.
Click One Touch button to activate
all functions.
Adjust the maximum speed with the
speed adjustment dial.
Use buttons to change cleaning
settings from the dashboard.
During the cleaning job it’s possible
to adjust the solution flow, the brush
pressure, activiting Eco Mode or
Silent Mode from the dashboard.
