Viper 460XV, Руководство пользователя

Страница: 13 / 37

14
© 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
To activate one-time bypass:
1. After parking turn the ignition off.
2. Turn the ignition On for more than 1-second and less than
3-seconds.
3. The siren will chirp once to indicate one-time bypass has
been activated.
To cancel one-time bypass perform one of the following:
Arm then disarm the alarm.
Turn the ignition On for more than 3-seconds.
transmitter sensor disable
To temporarily disable a sensor input, arm the system. Press the
button again and the system will respond with 3 indicator
flashes. This means all sensor warn-away triggers are bypassed.
Press the button again and the system will respond with 4
indicator light flashes. This means all sensor warn-away and full
triggers are bypassed.
autoimmobilisation
The built-in Triple Circuit Immobiliser will automatically arm
(indicated by a slow LED flash), 30 seconds after the ignition is
turned off. (This feature is a Thatcham and EC requirement and,
therefore, is not user-programmable.) To disarm the Immobiliser
when it has AutoImmobilised, either use the remote control to
arm and then disarm the system, or turn the ignition on and
press the or button or enter your 4-digit PIN code.
➜
➜