2.
Select the Web browser and click [Uninstall].
ð
Uninstall process will be performed.
Calibration mode
allows to calibrate touch screen, can be accessed by "Tap-Tap" proce-
dure. "Tap-Tap" consists in a sequence of several touch activations by simple means of
the finger tapping the touch screen performed during the power-up phase and started
immediately after the cloudPanel is powered on.
1.
When
TAP-TAP DETECTED
message appears on the top of the screen, wait for 5
seconds (without touching the screen) to enter
SYSTEM SETTINGS
.
2.
Press on touch screen,
TOUCHSCREEN CALIBRATION
will be highlighted in yellow,
hold pressed for few seconds until touchscreen calibration procedure starts.
3.
Follow the instructions on screen to complete the calibration procedure, system will
prompt to touch specific points to calibrate the touchscreen device.
Perform "Tap-Tap" sequence, then:
n
touch and hold for 5 seconds > Go to
System mode (Config OS mode)
n
or wait (without touching) for 5 seconds then:
–
touch and hold for 5 seconds > Go to
Calibration mode
–
wait without touching for 5 seconds > Go to
Default mode
Calibration mode
"Tap-Tap"summary
VIPA HMI
Deployment
Commissioning > System Settings
HB160 | TP-cloud | H71-L1A41-0 | en | 18-02
28
