VIPA PC-CPU 486, Руководство пользователя

Страница: 28 / 64

Chapter 3 BIOS / Register Manual VIPA PC-CPU 486
3-2 HB111E - Rev. 02/32
BIOS setup handling
At the start-up of the system, the BIOS version is displayed on the
connected monitor. Then the BIOS executes a test of the system
components and the memory. At the end of the test the system attempts to
boot. Between the start-up and the boot procedure you may access the
BIOS setup routine by operating the [Entf]/[Del] key.
An appropriate message is displayed on the screen.
Via the setup menu you may configure the hardware of your PC.
After hitting the [Entf]/[Del] key, the following menu appears:
+------------------------------------------------------------------------------+
| System Bios Setup - Utility v4.2 |
| (C) 1999 General Software, Inc. All rights reserved |
+------------------------------------------------------------------------------+
| |
| |
| |
| |
| Basic CMOS Configuration |
| VIPA Configuration |
| Read Setup values from CMOS |
| Reset CMOS/Flash to factory defaults |
| Write to CMOS/Flash and Exit |
| Exit without changing CMOS/Flash |
| |
| |
| |
| |
| |
| |
+------------------------------------------------------------------------------+
| <Esc> to continue (no save) |
| |
+------------------------------------------------------------------------------+
With the help of the standard cursor keys you may select the single menu
options. You activate the selected sub-menu with [Enter].
Via [ESC] you leave the setup without saving your entries.
General
BIOS menu