Manual VIPA HMI
Chapter 1
Hardware description
HB116E - CC03 - Rev. 07/30
1-7
Every CC 03 has an integrated 9pin jack at the side. This jack allows you to
extend the CC 03 with up to 4 System 100V expansion modules res.
System 200V modules. Please regard that the maximum current load of
800mA for the backplane bus must not be exceeded.
To connect your modules, a special bus coupling cable is required that is
available with order number VIPA 660-0KB00 at VIPA. For the connection,
the bus cable is provided with a 9pin plug at one side and a 1tier bus
coupler at the other. The project engineering of the expansion periphery
happens in the hardware configurator from Siemens.
The CC 03 has an integrated power supply. The power supply has to be
provided with DC 24V (20.4 ... 28.8V). For this an according DC 24V slot is
located at the back side. The power supply is protected against inverse
polarity and overcurrent.
Besides of the electronics, the supply voltage feeds also the optional
components like output periphery, DP slave and bus extension.
Note!
Please regard that the bus extension may stand a max. of 800mA.
The LEDs at the backside serve the status monitoring of the integrated
CPU and the optional Profibus-DP slave. All LEDs except of FC and MC
are also at the front side. The following table shows color and usage:
Label Color
Description
R
Green CPU is in the operating mode RUN
S
Yellow CPU is in the operating mode STOP
DE Yellow
DE (
D
ata
E
xchange) indicates Profibus communication
activity of the DP slave. (only VIPA 603-2CC21).
PW
Green CPU portion is supplied internal
SF
Red
On at system error (hardware failure)
FC
Yellow On as soon as variables are forced*
MC
Yellow Shows access to MMC *
* only back side
With the operating mode switch you may choose between the operating
modes STOP and RUN. The operating mode START-UP is processed
automatically by the CPU between STOP and RUN.
By means of the switch location Memory Reset (MRST) you request an
overall reset res. a firmware update from a plugged MMC.
Extension jack
Power supply
LEDs
Operating mode
switch
RUN/STOP/MRST
DC24V
L+
+
M
M
