Chapter 1 Hardware description
Manual VIPA HMI
1-10
HB160E - TP - RE_62F-FEE0 - Rev. 12/51
Dimensions
installation width
in
s
tal
la
ti
on
hi
gh
t
installation
depth
width
hi
gh
t
For the installation of the Touch Panel in control cabinets and desks the
following dimensions are necessary:
Front panel width
2.5 ... 6mm
Installation cutting (W x H)
200 x 144mm
Front panel (W x H)
212 x 156mm
Back side (W x H x D)
198 x 142 x 37mm
Installation depth
37mm
Note!
The degrees of protection are only guaranteed when the following is
observed:
•
Material thickness at the mounting cut-out: 2.5 ... 6mm
•
The deviation from the plane for the panel cut-out is
≤
0.5mm. This
condition must be fulfilled for the mounted HMI device
•
Permissible surface roughness in the area of the seal:
≤
120µm
(friction coefficient 120)
Installation
dimensions
5.7''
62F-FEE0
