VIPA 610-1BC00, Руководство пользователя

Страница: 32 / 62

Chapter 2 Deployment Touch Panel Manual VIPA HMI
2-12 HB160E - TP - RE_610-1BC00 - Rev. 08/13
The dialog window where to configure the integrated MPI interface is to be
found at
Start > Settings > Control Panel > MPI Configuration .
HSA
Here you set the highest MPI address ( h ighest s tation a ddress). Within a
MPI network the highest MPI address must be identical!
TS
With TS ( t his s tation) you set the local MPI address for the Touch Panel.
Baud Rate
Enter here the transfer velocity of your MPI net. The baud rate has to be
identical for every MPI participant within the network. According to the
Baud Rate the network parameters are set.
Default Net Parameters
It is recommended not to alter the Default Net Parameters that are set by
the baud rate.
Status
The status of the MPI interface is monitored via Status as "Offline",
"Online" or "Error".
Note!
Here made changes are also not saved after PowerOFF-PowerON. Save
the data permanently in the current registry file via
Save Registry at
Start > Programs > KuK Tools .
Set MPI parameters