VIPA 608-3B2G0, Руководство пользователя

Страница: 35 / 62

Manual VIPA HMI Chapter 2 Deployment Touch Panel
HB160E - TP - RE_608-3B2G0 - Rev. 09/09 2-15
Please regard, Ethernet communication is only supported by ActiveSync up
to Version 3.8.
If your Touch Panel shall be available via Ethernet you have to install a
partnership for USB communication first like shown above. Afterwards you
may configure a partnership for Ethernet communication after the following
approach:
•
To enable the Touch Panel to be accessed via Ethernet you have to
activate the option "enable network connection" in ActiveSync via
File > Connection Settings :
•
Disconnect the USB cable of the Touch Panel.
•
Confirm the message that the device could not be found.
•
Start the communication program required for ActiveSync at the Touch
Panel via
START > Programs > Communication > Act.Sync Netw and
click on [Connect].
Now you may access the Touch Panel with ActiveSync via Ethernet.
Note!
To keep the settings also after power on, you have to store them to the
registry with
START > Programs > KuK Tools > Save.
Install partnership
via Ethernet