Viotek GN27CB, Руководство пользователя, Страница: 8 / 20

8
Section 5: Mount Installation
This monitor ONLY includes screws which may be used when attaching
the monitor to a VESA 75x75mm type mount. No VESA mount or
mounting accessory is included.
Keep the foam underneath the monitor before attaching the stand to a mount
or accessory.
1. Open the package and take out the monitor with foam still attached. Gently place
it on a desktop or table. Remove the extra parts and the foam covering the back
of the monitor. Press the release button to remove the stand plate. If the monitor
is already attached to the stand, remove the stand.
Button
Stand Plate
2. Remove the original screws x 4 (
1
) from the opening in the back of the monitor.
3. Follow the directions received with your VESA mount, stand, or accessory
and install the monitor on the wall or fixture as desired. Remember to use the
included NO. 2 screws when mounting the monitor. Refer to the image (
2
) for
correct screw placement.
1
2
Use the 31mm
NO. 2 Screws x 2
Use the 26mm
NO. 2 Screws x 2
-
Use only the NO. 2 Screws (31 mm x 2 pcs, 26mm x 2 pcs) provided with
this type of installation.
- Do not discard the original screws as these may be needed for future use.
Mount
(Not included)