VIOMI V2 max, Руководство пользователя

Страница: 17 / 19

14
Troubleshooting
Fault Solution Fault Solution
Error 1: Make sure that
thelaserdistancesensor
is not obstructed.
Clear any foreign objects which may
block or obstruct the laser distance
sensor, or move the vacuum-mop to a
Error8:Reinstallthedust
compartment and filter.
Make sure the dust compartment
andfilterareinstalledcorrectly.Ifthe
errorpersists,tryreplacingthefilter.
newlocationandreactivateit.
Error 2: Wipe the cliff
sensor clean, move the
Partofthevacuum-mopmaybeoffthe
ground, re-position the vacuum-mop
Error 9: Move the
vacuum-moptoanew
locationandreactivateit.
A wheel may be off the ground.
Re-position the vacuum-mop and
reactivate it.
vacuum-mop to anew andreactivateit.Thecliffsensorisdirty,
location, and reactivate it.
Error 3: Strong magnetic
wipeoffthedirtfromthecliffsensor.
The vacuum-mop may be too close to
Error 10: Clear any
obstacles around the
vacuum-mop.
The vacuum-mop may be caught or
stuck. Clear away any obstructions
around it.
fielddetected.Reactivate a virtual wall. Move the vacuum-mop
the vacuum-mop away
from any virtual walls.
toa new location and reactivate it.
Error11:Makesurethe
water reservoir is
installed properly.
Make sure the water reservoir or
2-in-1 dust compartment with water
reservoir is securely installed.
Error 4: Clear the collision Thecollisionsensormaybestuck.
sensor of any foreign
objects.
Error 5:Vacuum-mop is
operating at an abnormal
temperature.
Error 6:Chargingerror.
Trycleaning thecharging
contacts.
Error 7: Place the
vacuum-mop on level
groundandreactivateit.
Gently tap it several times to remove
anyforeignobjects.Ifnothingfalls
out, move the vacuum-mop to a
different location and reactivate it.
The operating temperature of the
vacuum-mop is too high or too low.
Wait until the temperature
normalizes, then try again.
Wipethe chargingcontactsbothon the
charging dock and the vacuum-mop
witha dry cloth.
The vacuum-mop is tilted at startup.
Movethevacuum-moptoalevel
surface and reactivate it. You can
also reset the level of vacuum-mop in
the app, then reactivate it.
Error 12: Make sure the
mop is installed properly.
Error 13: Unable to return
tothechargingdock.
Error 14: Low baGery.
Please recharge.
Error 15:Remove the mop.
Makesurethemopholderandmop
are securely installed.
Place the vacuum-mop onto the
charging dock.
Place the vacuum-mop onto the
charging dock, then reactivate it aher
it is fully charged.
Remove the mop and holder, then
reactivate the vacuum-mop.