VIOLET Design Flamingo Series Скачать руководство пользователя страница 5

start. Closer distance will add more details, tone and separation. Larger distance will 
add room ambience, naturalness and blending with other instruments. 

 
BOWED STRINGS 

Try different models depending from sound you are looking for. The distance of 30 to 
50 cm above the instrument bridge is preferable for violin and viola. The distance of 

10 to 20 cm in front of bridge is right for double bass or cello. 
 
BRASS AND WIND 

The warm, full, natural tone of "The Flamingo Vintage" microphones makes them the 
best choice to record saxophone and other brass and wind instruments. For the 

clarinet and the soprano saxophone use the microphone 10 to 30 cm above the horn 
and lowest pads. For the other saxophones place microphone 5 to 15 cm in front of 

the lip of the bell. 
For the flute place the microphone above the middle of the instrument. Use 10 to 50 

cm distances for the trumpet, the trombone, the French horn, the tuba and other 
brass instruments. 
 

SPECIFICATIONS

 

Transducer type 

 

electrostatic 

Operating principle 

 

pressure gradient 

Diaphragm's active diameter 

 

26 mm 

Frequency range 

 

20 Hz to 20 kHz 

Polar pattern 

 

unidirectional 

Output impedance 

 

100 ohms 

Rated load impedance 

 

1000 ohms 

Suggested load impedance 

 

>250 ohms 

Sensitivity at 1000 Hz into 1000 ohms load   

27 mV/Pa 

S/N Ratio CCIR 468-3 weighted 

 

76 dB 

S/N Ratio DIN/IEC 651 A-weighted 

 

87 dB-A 

Equivalent noise level DIN/IEC A-weighted   

7 dB-A 

Maximum SPL for 0.5% THD at 1000 ohm load  134 dB 
Dynamic range of the internal preamplifier   

127 dB 

Output connector ( microphone )   

 

7-pin XLR male, gold plated contacts 

Signal polarity ( microphone ) 

toward pressure on a diaphragm produces positive 

 

 

 

 

 

polarity voltage on XLR pin #6 relatively to pin #5 

Microphones dimensions and weight 

 

H307 x D68 mm, 1300 g 

VSM47-FL dimensions and weight   

 

H120 x W100 x D145 mm, 350 g  

VPSU-FL dimensions and weight 

 

 

H55 x W225 x D180 x 55 mm, 1000 g 

Selectable mains voltage, frequency 

 

100/120/220/240 V AC, 45-65 Hz 

Mains fuse 

 

 

 

 

 

250 mA (100/120V),  125 mA (220/240V) 

Power 

consumption 

    <20 

 
INCLUDED ACCESSORIES 
VSM47-FL vintage style elastic spider type shock mount 

VPSU-FL power supply unit 
VAC-2 mains cable 

VTC-06 tube microphone cable 6m 
 

OPTIONAL ACCESSORIES 
VMC-06 star quad microphone cable 6m 

 

Отзывы: