14
THE SIGNAL ROUTING
(see also page 7)
After the activation of an input by the dedicated relais, the signal is fed
to a buffer amp to achieve a low impedance state. Next the signal is
routed to the volume control which his again followed by a buffer amp.
At last the signal reaches the output drivers which may be set to
different output levels.
THE UNBALANCED OUTPUTS
are situated on the rear panel of PRE V630 in the field "ANALOG
OUTPUTS " and denoted as "UNBAL L/R".
They are equipped with gold plated cinch
sockets.
As a special feature the unbalanced outputs
may be set “pre fader” or “post fader”.
“Post Fader“ means, that the volume control
is affecting the signal level of the
unbalanced outputs.
„PRE FADER“ means, that the buffered
activated input signal is routed unaffected to
the unbalanced outputs.
This setting may be useful when the un-
balanced outputs are connected to an
appliance with its own volume control like a
headphone amplifier.
Содержание PRE V630
Страница 1: ...1 Line Signal PRE AMPLIFIER PRE V630 USER s MANUAL ...
Страница 9: ...9 Connection Connectors for Analog Signals ...
Страница 18: ...18 ...