Violectric PPA V600, Руководство пользователя

Страница: 19 / 28

19
THE UNBALANCED OUTPUTS
The unbalanced output signal is available at gold-plated cinch sockets
on the rear panel. They are denoted as 'UNBAL L' for the left channel,
and 'UNBAL R' for the right one respectively.
Output impedance is significantly less than 1 ohm !
THE BALANCED OUTPUTS
The balanced output signal is available at gold-plated XLR connectors
on the rear panel. They are denoted as 'BAL L' for the left channel, and
'BAL R' for the right channel respectively.
Output impedance is significantly less than 1 ohm !
Output polarity complies with AES 14-1992:
1 = ground / 2 = in phase / 3 = out of phase.
NOTE:
When connecting unbalanced loads to the balanced outputs, pin 3 must
not be bridged to signal ground but left unconnected. Output signal level
drops by 6 dB in this mode.
NOTE:
Unbalanced and balanced outputs shall not be used simultaneously, as
the output driver feeds both the cinch socket and the in-phase pin of the
balanced output at the same time.