1: FIT BASE TREAD
Turn support legs upside down and fit base
tread over ends. Make certain locking pin knobs
on support legs are facing inward toward each
other (Detail 1.1). Align the button-lock tabs on
the ends on the support legs (1.2) with the
openings in the base tread (1.3). Gently tap
bottom of base tread so the button-lock tabs
protrude through and secure base tread in
place. The locking pin knobs on the support legs
will also lock base tread in place (1.4).
1.1
1.3
1.4
BUTTON
LOCK
TAB
1.2
2: FIT TREADS
Fit three (3) treads onto / over support legs from top with anti-skid surfaces facing up (Detail
2.1 & 2.2). Slide the first tread downward and snap and lock it in place over the tread lock pins
molded on the bottom of the support legs. Use a rubber mallet and gently tap top of tread so it
snaps and locks into place (2.4). For the second and third treads, fit tread lock pins entirely into
the round holes on the support legs (2.2 & 2.3) and slide treads downward. Similarly, snap and
lock treads in place (2.4)
2.1
2.3
1
3
2
2.2
2.4
3: FIT HANDRAILS
L
R
Fit last tread onto / over ends of left
(L) and right (R) handrails with the
anti-skid surface on the top and slide
upwards out of the way (Detail 3.1).
Fit the bottoms of the left and right
handrails into the top of the support
legs, from the back. Each handrail has
three knobs that fit into holes on the
support leg. Fit these tightly and
repeat for both handrails. Fit a tread
lock pin through the round holes in
both the left and right support leg and
into each handrail entirely. Similar to
above, slide the tread downward and
snap and lock the tread in place over
the tread locking pins. Double check
that all treads are securely in place
and locked over all tread lock pins.
3.1
L
R
REMEMBER ~ ALWAYS SWIM
SAFELY ~ NEVER JUMP OR DIVE
INTO THE POOL ~ NOTHING
REPLACES PARENTAL SUPERVISION
