Maintenance
13
www.vinylsystems.com
Blade
The blade is your bread and butter with any vinyl cutter. All Vinyl Systems cutters
come equipped with a 45 degree angle blade. We would recommend replacing the
blade every 6-12 months of continuous use. This can vary depending on the type and
thickness of your material.
Cutting Pad
The cutting pad is essentially the white strip your blade makes indirect contact with
when it is cutting through your material. This cutting pad can typically last about 6-12
months of continuous use before it will need to be replaced. One way you will notice
an issue is when your designs start to have missing parts or it starts to cut away from
the vector path.
Blade Holder
The blade holder uses bearings inside that allows the blade to pivot when it is cutting
corners, edges, and circles. These bearings can wear down over time which means
you will have to replace the entire blade holder. A blade holder should usually last
you over 1-2 years of continuous use. Only replace this if you have replaced the
blade, corrected the offset settings, replaced the cutting pad, and are still having
issues with finished cuts.
You may purchase all of these accessories and supplies at www.vinylsystems.com
Содержание Specialist
Страница 1: ......
