16
Section 2
Operation
Contents
Para
General
1
To identify components, please refer to
and
. For further operating instructions, please
refer to Vision 250 E/IT Operators Guide, Publication
Part No. 3791-8
.
Installing the head
2
The Vision 250 E/IT head is supplied with a flat base and is designed for installation on a compatible
Vinten tripod or pedestal, using either the four mounting bolts and washers provided or by using a `Quickfix'
adaptor.
3
Adaptors are available which enable the heads to be installed on tripods or pedestals fitted with other
mountings. These are listed under ‘Optional Accessories’.
4
The head may be levelled with the aid of the level bubble
which is illuminated by pressing the switch
.The light will extinguish after 15 seconds.
NOTE:
If the ambient light level is high, the level bubble will not be lit.