20
4.5
Check for ageing and cracking of the rubber foot securing straps on the spreader and renew if
necessary.
5
No further routine maintenance is required.
Battery replacement
6
The battery illuminates the level bubble (10) when the switch (13) is pressed. The level bubble remains
lit for approximately 15 seconds.
7
The battery should be replaced yearly or whenever the illumination is considered inadequate.
8
To replace the battery
8.1
Tilt the head backwards to allow access to the battery cover
.
8.2
Push down on the top of the battery cover
and pull forward.
8.3
Pull the battery
out of the battery compartment.
8.4
Push the replacement battery into the battery compartment, observing the correct polarity, as
indicated on the inside of the compartment
8.5
Refit the battery cover
.
8.6
Press the switch (13) and ensure that the level bubble (10) is lit for approximately 15 seconds.
Fig 4.1 Battery replacement
(4)
(16.1)
(16)
Содержание pro-touch Pro-10 System
Страница 1: ...Contents Vinten Camera Control Solutions Next Page Previous View pro touch ...
Страница 38: ...38 Contents Previous Page First Page Next Page Previous View Fig 6 1 Pro 10 System 1 2 3 ...
Страница 47: ...47 Contents Previous Page First Page Next Page Previous View Fig 6 5 Pozi Loc Two Stage Tripod 3819 3 1 2 3 4 ...