manualshive.com logo in svg

Vinten flowtech 75, Руководство пользователя

Поделиться
Скачать
Vinten flowtech 75 Скачать руководство пользователя страница 9

7

Installation

Attach Optional Mid Level Spreader

!

CAUTION! 

Ensure the latching pins are fully engaged with 

the locating holes in the tripod. Failure to attach correctly 

could result in damage to the equipment

The tripod is delivered with the Hinge Lock in the OFF  

position for use with a spreader.  

(See page 8 for lock operation).

1. 

Hold the spreader between thumb  

and forefinger and squeeze the 

 

release buttons on each side.

2. 

Align the latching pins with the locating  

holes on the tripod leg.

3. 

Release the buttons to lock the 

spreader in place.

4. 

Unlock the spreader arms to allow the arms to extend as required.

5. 

Tighten the spreader locks when the tripod legs are in the correct 

position.

If the spreader will not lay flat when fitted, check the Hinge 

Lock is in the OFF (spreader mode) position for use with a 

spreader. (See page 8 for lock operation).

Содержание flowtech 75





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды