20
Battery replacement
7
he battery illuminates the level bubble. After pressing the switch it remains lit for approximately 15
seconds.
8
The battery should be replaced yearly or whenever the illumination is considered inadequate.
9
To replace the battery (
9.1
Tilt the head forwards to allow access to the battery cover
and apply the tilt brake
9.2
Using a thin-bladed screwdriver or similar tool, prise off the battery cover
9.3
to the extent allowed by the cable and remove the connector
9.4
Push the connector onto the terminals of the replacement battery.
WARNING!: If a payload is not fitted to the head, turn the balance knob
full counter-
clockwise to reduce the balancing force before tilting the head forwards.
Fig 4.1 Battery replacement
(10)
(10.1)
(10.2)
(2)
(12)
(15)
(9)