Vinteck
V-10 CLIPPER
pag.11
Edizione 01 revisione0
3-
Numbering of MIDI 0-127 / 1-128
Display show MIDI followed by a number from 0 to 1
0 = 0-127 , 1= 1-128
Make selection with UP and DW (down).
Save and exit with MD
4-
External Tap Tempo Control Change value
With an external temporary button, to be connected to EX_SW, is possible to send a
CONTROLA CHANGE command for tap tempo in any moment, independent from programs.
Ant kind of temporary button may be used.
Top reset the CONTROL CHANGE:
Display show TAP follone by a number from 1 a 128
Make selection with UP and DW (down).
Save and exit with MD
Note: on same devices CC for tap is 80. Check on device user manual to preset the right value.
5-
Control Changes assign to buttons 1-5, Value and channels
With this commando is possible assigb up to 5 control change to buttons 1, 2, 3, 4, 5 to be able
to recall them on patch.
The CC of button 5 is dedicated to Expression pedal
Display show CC1=000
Pressing buttons 1-5 shows respectively :
CC1=000
CC2=000
CC3=000
CC4=000
CC5=000
For each single button is possible assign the CC, the canne and the value.
Button
6
assign the nr of CC: UP e DW for selection, value from 1 to 120)
Display show CC1 : 000 ( from 000 to 120)
Button
7
asseign the CHANNEL of CC: UP e DW for selection, value from 1 to 16
Dispaly show CC CH 1 : 016 ( from 000 to 016)
Button
8
assign the VALUE of CC: UP e DW for selection, value from 0 to 127
Display show CCV1 : 000 ( from 000 to 127)
Note: for CC of button 5 values have to be preset in
function 6
Save and exit with MD
Orange LED “C” blinks to show that you’re working on CC
6-
External expression pedal calibration. CC value assignement.
Chose 1 (button 1): display show:
EXP 255 255
This is therangeof calibration of external expression pedal..
Move up and down the espressione pedal. Calibration is tuned. Value may be from 0 to 255
Display show EXP 255 255 (basic. After calibration may be 0 to 255)
Button 2 assign the
CC LOWER END
from 0 to 128. SMake selection with UP and DW
Display show EXP L : 000
-
Button 2 assign the
CC UPPER END
from 0 to 128. SMake selection with UP and DW
Visualizzato EXP U : 000
Save and exit with MD
