Vintec V150SG2E-AL, Руководство пользователя

Страница: 11 / 20

V190SG2E-AL V150SG2E-AL 11
User Manual
11. After reversing the door, it is important to check that the sealing strip provides a tight seal all the way
round. If it does not, carefully heat the strip all the way round using a hair dryer. Then ease the strip
outwards slightly so that it forms a tight seal against the cabinet. Be careful not to heat the strip so
much that it melts!
9. Click the covers into place
on the plinth sides on the op-
posite side.
10. Fit the door onto the bottom
pin, fit the top hinge and
tighten securely.
8. When the lock pin has been
loosened completely, pull
it up together with the lock
cylinder and refit on opposite
side.