V40DG2EBK AL-V40DG2E
11
User Manual
- Do not over load your wine cellar to facilitate air circulation.
- Do not stack more than 1.5 rows of standard 0.75L bottles per shelves to facilitate air
circulation
- Avoid obstructing the internal fans (located inside on the back panel of the wine cellar).
- Do not slide the shelves outwards beyond the fixed position to prevent the bottles from
falling.
- Do not pull out more than one loaded shelf at a time as this may cause the wine cellar to
tilt forward.
- Do not cover the wooden shelves with alloy foil or other materials, as it will obstruct air
circulation.
- Do not move your wine cellar while it is loaded with wines. This might distort the body
of the wine cellar and cause back injury.
TYPES OF REGULATION
Please note that depending on the loading and settings chosen it takes about 24 hours for
the wine cellar to see the temperature stabilizing.
During this time LED seems to move erratically. It is normal and this process occurs
whenever the setting is modified and/or whenever a large amount of bottles are added to
the cellar.
Two Compartment single temperature wine cellars (2-in-1 Wine Cellars):
electronic
regulation digital display
DG models are made of two independent compartments regulated independently as 2
single zone wine cellars. Like the e models, each compartment are adjustable from 6ºC to
18ºC. Ideal for storage or “mise en temperature” (The right temperature for optimum
enjoyment)
