4. INSTALL TOP FEET
5. REPLACE TOP PANEL
Carefully install the bottom two (2) top feet in the side of the rack through the existing screw holes. Secure the screws with
your #2 Phillips-head and the hex nuts provided separately with your rack.
Put the top panel back in place, replace the top three (3) front panel screws, and
then all ten (10) top panel screws with your #1 Phillips-head.
6. REMOVE BOTTOM PANEL
Using your #1 Phillips-head, remove all ten (10) screws from the bottom panel and the three (3) front panel screws at the
bottom of the rack. Remove the bottom panel and set it aside.
